Engineering challenges in the integration of the DALI cryogenic dark-matter prototype

Hernández, Elvio; Carroll, Dylan; Lorenzo, Haroldo; Arizaga, Iñigo; Joven, Enrique; De Miguel, Javier
Referencia bibliográfica

Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation VII

Fecha de publicación:
8
2026
Número de autores
6
Número de autores del IAC
4
Número de citas
0
Número de citas referidas
0
Descripción
The Instituto de Astrofísica de Canarias (IAC) is developing the DALI (Dark-photons & Axion-Like particles Interferometer) Proof-of-Principle prototype, an astro-particle instrument aimed at detecting axions and dark photons in the 6-60 GHz range. This paper presents the engineering development of the prototype, with particular emphasis on the mechanical integration of the 72-magnet array into a ferromagnetic yoke and the thermal architecture required to cool a large 350 kg magnetic assembly to cryogenic temperatures. The assembly process revealed significant real-world magnetic instabilities not predicted by the theoretical configuration, requiring the implementation of dedicated tooling, safety procedures, and additional mechanical retention systems. Cryo-vacuum testing of the fully integrated system demonstrated successful operation under combined magnetic, vacuum, and cryogenic conditions. The thermal design enabled the magnetic assembly to reach temperatures near 37 K, while highly sensitive detector components achieved temperatures as low as 10 K through dedicated thermal isolation strategies. In parallel, a flexure-based tuneable resonator mechanism developed for future integration was experimentally characterized at ambient conditions. These results validate the adopted mechanical and thermal solutions and provide a foundation for future development of the full DALI experiment.