A high-isolation wideband channelizer for MKID readouts: a custom HLS implementation on RFSoC

Hernández Fernández, Alberto; Díaz Martín, David; Díaz García, José Javier; Hoyland, Roger John; Rodríguez Ramos, Luis Fernando; Portero Rodríguez, Diego; Rodríguez Pérez, Silvestre
Referencia bibliográfica

Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XIII

Fecha de publicación:
8
2026
Número de autores
7
Número de autores del IAC
6
Número de citas
0
Número de citas referidas
0
Descripción
We present a high-performance channelizer for Microwave Kinetic Inductance Detectors (MKIDs), designed to mitigate spectral leakage and scalloping loss through a 50% overlapping Polyphase Filter Bank (PFB). The design is implemented on a Xilinx Zynq UltraScale+ RFSoC ZCU111 using a custom design — primarily in Vitis High-Level Synthesis (HLS), with the time-critical done serializer and glue logic in VHDL — that processes a 4.096 GSPS input stream with a per-branch Super-Sample Rate (SSR) of 16. Rather than relying on aggressive 512 MHz clocking and vendor IP cores, our split-path architecture computes the delayed and non-delayed polyphase branches concurrently, so that the bulk of the channelizer operates at a robust 256 MHz while a single 512 MHz subdomain is confined to the BRAM-to-FFT section. This architectural parallelism enables a deep 16-tap prototype filter that doubles the filter depth of comparable high-speed systems and substantially improves channel isolation. The 2/1 overlapped channel response is validated in simulation—recovering the ~3.9 dB scalloping loss of a critically-sampled channelizer to below 0.1 dB across the full 2 MHz channel—while the parent readout system has been operated cryogenically with an MKID array in an Adiabatic Demagnetization Refrigerator (ADR), identifying individual resonators in total darkness. The result is a resource-efficient, high-isolation benchmark for wideband frequency-division-multiplexed (FDM) readouts.