Design of the J-PAS and J-PLUS filter systems

Marín-Franch, A.; Chueca, S.; Moles, M.; Benitez, N.; Taylor, K.; Cepa, J.; Cenarro, A. J.; Cristobal-Hornillos, D.; Ederoclite, A.; Gruel, N.; Hernández-Fuertes, J.; López-Sainz, A.; Luis-Simoes, R.; Rueda-Teruel, F.; Rueda-Teruel, S.; Varela, J.; Yanes-Díaz, A.; Brauneck, U.; Danielou, A.; Dupke, R.; Fernández-Soto, A.; Mendes de Oliveira, C.; Sodré, L.
Bibliographical reference

Modern Technologies in Space- and Ground-based Telescopes and Instrumentation II. Proceedings of the SPIE, Volume 8450, id. 84503S-84503S-6 (2012).

Advertised on:
9
2012
Number of authors
23
IAC number of authors
1
Citations
31
Refereed citations
18
Description
J-PAS (Javalambre-PAU Astrophysical Survey) is a Spanish-Brazilian collaboration to conduct an innovative photometric survey of more than 8000 square degrees of northern sky using a system of 57 filters, 54 narrow-band (FWHM=13.8 nm) filters continuously populating the spectrum between 370 to 920 nm with 10.0 nm steps, plus 3 broad-band filters. Together with the main J-PAS survey, the collaboration is carrying out J-PLUS (the Javalambre Photometric Local Universe Survey), an all-sky survey using a set of 12 carefully optimized broad- and narrow-band filters that will be used to perform the calibration tasks for the main survey. The J-PAS survey will be carried out using JPCam, a 14-CCD mosaic camera using the new e2v 9.2k-by-9.2k, 10μm pixel detectors, mounted on the JST/T250, a dedicated 2.55-m wide-field telescope at the Observatorio Astrofísico de Javalambre (OAJ) in Teruel, Spain. J-PLUS, on the other hand, will be carried out using a wide field CCD camera (the T80Cam) equipped with a large format STA 1600 CCD (10.5k-by-10.5k, 9μm pixel) and mounted on the JAST/T80, a dedicated 0.83-m wide-field telescope at the OAJ. In both cases, the filters will operate close to, but up-stream from the dewar window in a fast converging optical beam. This optical configuration imposes challenging requirements for the J-PLUS and J-PAS filters, some of them requiring the development of new filter design solutions. This paper describes the main requirements and design strategies for these two sets of filters.